C3 MARINE and nano ceramic coatings for paint and rim protection.
C3 MARINE coatings consist of particles within the hard resin that works to repel contamination and increase shine. It leaves a wet’ look that many in the industry desire. Most coatings are self-cleaning and even delay the buildup of crime and the elements in between cleans. Only professional applicators can apply which cant be removed using wool or denim pads. The only option is sanding. No other ceramic coatings is as strong as C3 MARINE. It can withstand heat upto 1200 degree Celsius where as other ceramic coating can withstand upto 1200 degree Farenheit.
“Surface Science”, to put it simply, is the exploration and exploitation of various phenomena at the intersection of different phases of materials.
In this particular instance of paint surface protection, it is the beneficial ability to allow transfer of particles from one surface to the other so that a nano (a nanometre is one millionth of a millimetre) coating becomes inseparable from a car’s paint surface.
Automotive nano-coatings “bond” chemically and physically to the paint surface, however, dependent on the specific formula and ingredients, the longevity of these coatings can differ. Providing a specific cleaning regime is adhered to, ceramic coatings can last anywhere between 1 and 2 years on proper maintenance it can increased upto 3 years. But C3 Marine durability comes more than 10 years with minimum maintenance warranty period of 5 years in fact this coatings are bonded to surfaces so well that they need to be machine buffed off with grit paper to be removed.
What’s the difference between a C3 coating and a ceramic coating?
The simple answer is durability and functionality.
They are both coatings that are applied to a surface to protect it. Their chemical constituents are different. coatings usually require professional application – and once they are applied it is very difficult to remove them – so extreme care has to be taken.
A ceramic coating performs the same basic job of protection but is usually a liquid polymer that is applied by hand to the exterior of a vehicle. The coating also chemically bonds with the vehicle’s factory paint, creating a layer of protection – and, in some cases, is easier for the non-professional to apply with good results
Both types of coating create a permanent (or semi-permanent) bond with a vehicle’s paint, meaning that it does not wash away or break down and does not require repeated application every few months.
Ceramic coating adds additional protection to a car’s exterior but C3 coating helps keep it looking like new with comparatively minimal maintenance.
Ceramic coating is a single product of applied one above the another, which may may result in failure in case of 1st layer failed to bond. The first layer which in contact with the painted surface holds the other layers of ceramic coating. If any failures happened at the first stage will leads to peel. Also in that case vehicle paint surface had to be repaired by professionals.
CERAMIC COATING
Protection from uv damage/oxidisation/fading
C3 COATING
COREFIBRE TECHNOLOGY CROSSFIBRE TECHNOLOGY
C3 coating comes with a multi products with multi layers through which unnecessary external and internal vibrations on coating surface were avoided. These layers acts like a cushion through which peel or failure of products were avoided. Bottom coat is flexible and have a properties of Self-healing which tends to flexible during internal impacts on molecules. Also layers like I-Mediant increases colour darkness and also gives strength to layers applied before. X- Mediant and X- Base were used under Cross-fibre technology which increases the hardness to extreme level and increases brightness up to 20%. Since C3 coating developed for high durability and hardness to resist minute swirl’s and scratches self-healing capabilities on top surface is not necessary.
Listed below were some of the products of used in C3 COATING pack ranges.
BOTTOM COAT
I-MEDIANT
TOPMID STAGE3
CORE2
CORE+
Z-BLACK
Z-BLACK PRO
X-MEDIANT
TOPPER
CROSS-GUARD
MARINE
X-BASE
GENEZEN and lots more....
General benefits of Ceramic and C3 coating
If a vehicle is often exposed to the sun, its paint will begin to oxidise/fade, resulting in dulled and faded paint. A layer of C3 coatings are multi layers with corefibre technology or ceramic coating with UV filters protects a vehicle’s paint from the sun’s rays, reducing the amount of oxidisation/fading.
By creating a chemically resistant surface, a C3 coating or ceramic coating can keep a vehicle’s paint protected form various contaminants. The outcome is that paintwork will be more resistant to staining and etching (e.g. from bird lime), provided the contaminant is removed reasonably promptly.
Ceramic coatings are hydrophobic and C3 coatings are Ultra hydrophobic, which means they are really good at repelling water (think of the “Lotus Leaf Effect”). Water will bead on the surface and slide off more easily. Mud, dirt and grime will have a more difficult time bonding to your vehicle’s paint, and when you wash your car contaminants be more easily removed – in fact they have a tendency not to “stick”. Another benefit is that there is less drying time as the vehicle surface has much less water clinging to it.
A deeper shine
Ceramic coating enhances the reflective properties of your car’s paint and clear coat and clarity to paintwork.
C3 coating enhances the reflective properties of your car’s paint, tint and clear coat, adding extra depth and extra clarity to paintwork Also resist dirt and dust much better than traditional protection - vehicles will stay cleaner for longer periods of time
Scratch protection
A C3 coating or ceramic coating is harder than your paint and lacquer surface, when it bonds to this surface it provides a measure of scratch protection much greater than your paint ever did. This does not mean “no more scratches” – it simply means a greater level of protection from scratches than the lacquered surface provided on its own.
Protection from uv damage/oxidisation/fading
If a vehicle is often exposed to the sun, its paint will begin to oxidise/fade, resulting in dulled and faded paint. A layer of C3 coatings are multi layers with corefibre technology or ceramic coating with UV filters protects a vehicle’s paint from the sun’s rays, reducing the amount of oxidisation/fading.
By creating a chemically resistant surface, a C3 coating or ceramic coating can keep a vehicle’s paint protected form various contaminants. The outcome is that paintwork will be more resistant to staining and etching (e.g. from bird lime), provided the contaminant is removed reasonably promptly.
Ceramic coatings are hydrophobic and C3 coatings are Ultra hydrophobic, which means they are really good at repelling water (think of the “Lotus Leaf Effect”). Water will bead on the surface and slide off more easily. Mud, dirt and grime will have a more difficult time bonding to your vehicle’s paint, and when you wash your car contaminants be more easily removed – in fact they have a tendency not to “stick”. Another benefit is that there is less drying time as the vehicle surface has much less water clinging to it.
A deeper shine
Ceramic coating enhances the reflective properties of your car’s paint and clear coat, adding depth and clarity to paintwork.
C3 coating enhances the reflective properties of your car’s paint, tint and clear coat, adding extra depth and extra clarity to paintwork Also resist dirt and dust much better than traditional protection - vehicles will stay cleaner for longer periods of time
Scratch protection
A C3 coating or ceramic coating is harder than your paint and lacquer surface, when it bonds to this surface it provides a measure of scratch protection much greater than your paint ever did. This does not mean “no more scratches” – it simply means a greater level of protection from scratches than the lacquered surface provided on its own.
More special about C3 SMART COATING
GENEZEN - Self repair or forced repair using hot water on minor scratches can be achieved.
Z-BLACK - provides stronger bond between layers, water beading up to 70% more than other traditional ceramic coatings, reduces watermark and increases visible darkness up to 20% than other Imediant or traditional ceramic coatings.
IMEDIANT - With increased supportive hardness along with 15% of visible brightness than any other coating products.
BOTTOM COAT - Increases visible brightness up to 25% even in a white colored vehicles and also forms a flexible first layer to protect vehicle paint surface from external impact.
XMEDIANT- Usually applied under X-CROSSFIBRE TECHNOLOGY, which is very unique on developing brightness up to 25% than BOTTOM COAT or any other coating products. Also this product cannot be reused or stored on freezer once opened, also cannot be used after 8 hours. Hence we ensure our vehicle by providing single use product with individual hardness of 9H.
CROSS GUARD - The name itself explains when and in which pack its used. Yes you are wright, this product is used on XTREME PACK and above which comes with X-CROSSFIBRE TECHNOLOGY. The only product in market that has a individual smooth and sleek properties along with hardness and brightness. Also achieves more hardness when applied in layers.
MARINE - Usually applied as base layer which is very strong when applied in layers. Forms a strong layers between other products to form a flat bed suspension properties which takes uneven impacts and transform impacts evenly to other layers which avoids peel and external damages too.